The magnesium sulfate board made of lightly burned magnesium oxide powder and magnesium sulfate solution overcomes the shortcomings of magnesium chloride board made of magnesium chloride solution, such as easy moisture absorption and brine return, high corrosion of chloride ions to metals, and poor volume stability. However, the traditional magnesium sulfate board has lower strength and poor water resistance than magnesium chloride board.

After years of research by scientific researchers, the magnesium sulfate board water-resistant enhancer is a special modifier for magnesium oxysulfide gelling material. It changes the phase composition of magnesium oxysulfide hydration products to form a layered structure strength phase, which can significantly improve the mechanical properties, water resistance and durability of magnesium sulfate board, thereby extending the service life of magnesium sulfate board.

【Scope of application】

It is suitable for any magnesium sulfate board with light-burned magnesium oxide powder and magnesium sulfate solution as gelling materials: such as magnesium sulfate fireproof door core board, magnesium sulfate foam board, magnesium sulfate fireproof board, magnesium sulfate inorganic fiberglass duct, magnesium sulfate mobile house, chicken house and pig house, magnesium sulfate greenhouse bracket, magnesium sulfate insulation roof board, partition board, magnesium sulfate corrugated tile, magnesium sulfate well tool, magnesium sulfate crafts, mural background wall and other products for enhancement and modification.

【Recommended dosage】

Recommended dosage: 0.8%~1.5% (accounting for the weight of light-burned magnesium oxide powder).

【Usage】

1. The amount of magnesium sulfate board water-resistant enhancer is calculated according to the weight ratio of light-burned magnesium oxide powder and accurately measured. 2. This product is easy to use. It can be added to the magnesium sulfate solution first, and then light-burned magnesium oxide powder and other materials are added for mixing and stirring, and the stirring time is extended by 1~2 minutes.

【Precautions】

1. Different products will use different production formulas and processes, but qualified light-burned magnesium oxide and industrial magnesium sulfate and other raw materials must be used. 2. The production environment temperature should be above 15℃. The dosage of the modifier can be adjusted according to the material setting time and the ambient temperature, but it should be within the recommended dosage and should not be too little or too much. 3. This product is a chemical. When using it, you should wear protective equipment to prevent direct contact with your hands and avoid getting into your eyes. Otherwise, rinse immediately with plenty of water. 4. If used in combination with other admixtures, it should be tested before mass production to determine whether it is feasible.